Evaluate the tread depth of your tires to make sure you have enough traction to grip the road. The penny test is a simple way to do this.
Use a tire pressure gauge to make sure your tires are properly inflated and then fill your tires with air as needed. To check your pressure, remove the valve stem cap,
Engine oil is essential for your bike’s smooth functioning and Basic motorcycle maintenance. Check the engine oil level monthly and ensure it is always at the proper level.
Examine the area for any probable oil leaks. The oil will thicken due to carbon deposits, causing a drag in the flow of the engine internals.
A Clutch is a frequently used device to shift gears at frequent intervals throughout a trip. The clutch should be set automatically and have the appropriate free play.
Do not over-tighten your clutch — an over-tightened clutch will force it to slip without your knowledge, resulting in increased fuel consumption
The engine is the heart of your bike, so keeping it serviced and tuned up regularly will keep it running smoothly and save you fuel costs.
When washing the carburetor and maintaining valve clearances, pay extra attention. Always remember to maintain the carburetor clean. Clean out the carburetor float chamber, as well as other parts, every 1500 kilometers
Ensure that both brakes are appropriately spaced to retain the tire in place. It is pretty dangerous when brakes become too tight or too loose.
Constantly adjust brakes according to the bike rider’s specific style and requirements. If the screeching sound continues, replace the front brake pads; this might also be due to an oil shortage.
A sound motorcycle is incomplete without a clean exterior. Make sure you have the motorcycle cleaned and nice before riding.
Using basic techniques you can keep your bike looking as good as new even after years of wear and tear. Make sure you use polish and wax to keep the motorcycle’s paint intact.